dedicated G range tile and slate ventilators are designed to
ventilate through the roof slope and form an integral part of the
The tile and slate
ventilators can be used at low level or high level where the roof
construction does not allow eaves or ridge ventilators to be used,
such as where compartment walls or where fire break walls obstruct
airflow. They are particularly suitable for insulation upgrades when
the roof covering is not being changed and are recommended by the
Energy Efficiency Partnership for Buildings as the solution for
ensuring adequate ventilation is provided. They are also used in
complex roof shapes where effective cross-ventilation is not
In addition, they can
be converted to soil vent pipes or mechanical extract terminals with
- Profile matched
and colour blended with adjacent slates, tiles and ridges as
standard, making the ventilators blend into the roofscape.
- Can be installed
wherever they are required as part of the normal roofing process.
- Driving rain and
deluge rain resistance demonstrated by test data.
- High nett free
ventilation area and low airflow resistance allow for an optimum
spacing to avoid stagnant air pockets.
supplied extensions sleeves ensure a clear air path from the roof
void to the outside to meet the design requirements of BS 5250.
- Integral 4mm large
insect ingress screen.
- An unrivalled
range of slate and tile profiles plus colour matching service.
- Designed and
developed under BS EN ISO 9001.