Latest News Thu, Jun 11, 2020 2:38 PM
Additional enhancements to 400-amp consumables extend life, lower total cost, promote consistent cut quality on material up to 50 mm.
Thermal Dynamics® Automation has upgraded its 400-amp cutting system — featuring Ultra-Cut® 400 XT high-precision power source, XT torch with QuickPierce consumables and iCNC Performance Controller — to reduce piercing time by up to 40% on mild steel thicknesses ranging from 30 to 50 mm. Faster piercing time reduces cycle time, especially for plates with a complex parts nest.
Thermal Dynamics also improved the front-end components on its 400-amp consumables and made several other arc starting enhancements to increase parts life, cut longer between consumable changes and lower total cut cost.
"We improved the gas flow routine within the Ultra-Cut® 400 XT high-precision power source and the 400-amp QuickPierce consumables feature more shielding gas ports on the shield cap," explains Dirk Ott, VP - Global Mechanized Plasma Systems, Thermal Dynamics Automation. "By increasing gas pressure during arc start, we reduce pierce time. Combined with the additional shielding gas ports, we deflect more molten metal away from the consumables. Thermal Dynamics offers a robust solution for cutting steel up to 50 mm thick."
New Routines
Thermal Dynamics further improved consumables life by adding pierce-on-the-fly and pierce-puddle-avoidance routines within its iCNC Performance Control. Traditional piercing routines keep the torch positioned over one spot until the plasma jet pierces completely through the plate; once the controller senses the pierce, it then moves the torch along the cut path. This routine inherently exposes the consumables to more molten metal.
"Pierce-on-the-fly starts moving the torch after about one-third of the total pierce time," says Ott. "The groove behind the torch provides an evacuation path for the molten metal, reducing its impact on the consumables. Also, you don't have to cut through slag puddle at the end of the cut, which promotes a cleaner cut."
Pierce-puddle-avoidance also extends consumables life by preventing the front end of the torch from touching the puddle during arc start. During arc start, the torch touches the plate, moves to an arc initiation height (which is relatively low) and starts the arc. After a split second, the controller raises the torch to a higher level, holds it there until the arc penetrates the plate, then lowers the torch to cutting height.
"Pierce-puddle-avoidance keeps the torch at a higher level for a second or two longer to minimize the impact of spatter and the chance of touching the puddle," says Ott.
An integrated Thermal Dynamics system offers industry-best combinations of performance, cut quality and lowest total cost of ownership, especially through improved consumables life. The company offers a cost savings calculator that enables fabricators to see how much they can save by upgrading to a Thermal Dynamics system.
Thermal Dynamics brings intelligence to the automated plasma table with a suite of fully-integrated components that enable users to orchestrate the fastest cut, best cut and lowest cost per cut regardless of operator experience. Visit www.thermal-dynamics.com to learn more
Featured News
Work to expand HMP Elmley, a Category B and C adult male prison located on the Isle...
Preparing industry for the Building Safety Act, improving productivity, reducing...
BUILDING PRODUCT LIBRARY - LATEST BROCHURES
REVO.Prime TSA 325 N...
By GEZE UK Ltd
Natural ventilation...
By Passivent
PACE 2024
By GEZE UK Ltd
Squash Court Floorin...
By Junckers Limited
Junckers Acoustics F...
By Junckers Limited
BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS
Discreet and secure, the Ei1025 Environmental Sensor can be placed throughout a property to monitor...
The Gateway and Cloud portal use Aico’s SmartLINK technology to bring together data from all...
The Ei3030 is a multi-sensor Fire & Carbon Monoxide (CO) Alarm. Containing our proven and dependable...
CONSTRUCTION VIDEOS - LATEST VIDEOS
In progressive and dynamic business sectors, such as construction, it’s natural to be forward...
Decorative aluminium horizontal bulkheads more than 100 metres long have been supplied and installed...
More than 150 sq.m of Vecta aluminium wall lining and a feature bulkhead have been manufactured and...