Safeguard Europe – the UK’s leading specialist in damp-proofing and
waterproofing technology – is now offering its market-leading Stormdry Masonry
Protection Cream in handy one litre tubs; providing a cost-effective solution
for those dealing with localised rain ingress through masonry, and tradespeople
wanting a convenient ‘on the van’ option for when needed.
Stormdry Masonry Protection Cream stops rain
penetrating external walls, keeping them warm and dry.
The Energy Saving Trust has
granted Stormdry ‘verified’ status from the as high levels of moisture in the masonry, such as those in
exposed locations, will lose heat faster than dry walls. Keeping walls dry by
applying Stormdry will maximise their thermal performance.
Stormdry can be applied to wet
walls that will dry out through it because of its permeability. Unlike other
rain penetration and damp-proofing treatments, Stormdry lines the pores of the
masonry so that water can escape as vapour but cannot enter in liquid form. This
‘breathability’ also enables Stormdry to help counter to the damp issues
encountered in cavity wall insulation because the wall can dry out while being
protected from any further water penetration that will affect the insulation’s
performance.
Easily applied by either brush or roller, Stormdry
cures colourlessly to the
original finish of masonry in just 12 hours. The cream penetrates far more
deeply than other water repellents – up to 12mm in fletton bricks – so that it
can also bridge cracks and better keep out moisture. For larger projects, or
for those using the product regularly, Stormdry also comes in three, five and
20 litre tubs.
With an active
ingredient level of 40% – compared to concentrations as low as 2.5% for some
competitors – Stormdry is not only far more effective at excluding moisture
from masonry; it also has a significantly longer life expectancy of up to 25
years.
This claim to
longevity is backed by the British Board of Agrément (BBA) as part of its
product process, where Stormdry was subject to accelerated ageing tests. Other
performance criteria considered by the BBA included: water repellency,
condensation risk, freeze/ thaw resistance and UV resistance.
Safeguard Europe’s range of market-leading, proven
damp-proofing solutions is supported by the company’s own highly qualified and
experienced staff. The support and know-how they offer is extended to
contractors, specifiers and property owners and includes technical advice,
specification help, research and even in-house laboratory analysis of plaster and masonry.
