BMI launches new Active Roof Systems

Sustainability Wed, Nov 20, 2019 4:32 PM

BMI UK & Ireland has enhanced its portfolio of market-leading pitched and flat roofing technology solutions with new Green and Blue ‘Active Roof Systems’. Active Roof Systems is how BMI UK & Ireland describes roof coverings that perform a greater function beyond shelter and protection.

While weather-tightness is the primary purpose of a roof, with the right technologies, roofs can be transformed into power stations, rainwater recycling systems or an opportunity to reduce energy costs.

An evolution of BMI’s existing offer, the BMI Canopia Green Roof offers the chance to create natural spaces in the sky, improving air quality, biodiversity and well-being for building users. Whether designed to be walked on, provide a roof-top garden, or simply to improve the aesthetic of the building, Green Roofs can reduce storm water run-off and can improve overall building performance by protecting roof surfaces from extreme weather.

BMI Canopia also improves the thermal efficiency of buildings by providing an additional insulatory layer, while also reducing solar gain and the effect of ‘urban heat islands’ which can be damaging to both health and the environment.

BMI Canopia is a range of four standard systems – Sedum, Wildflower, Biodiverse and Intensive Green – with the company also eager to work with designers, landscapers and contractors to develop bespoke solutions to meet exact customer needs. Sedum roofs lend themselves to rainwater attenuation, owing to the succulent nature of the planting; Wildflower and Biodiverse roofs deliver meadow habitats to support a greater breadth of flora and fauna than Sedum types; while Intensive Green Roofs are designed to be trafficked, creating gardens and recreational spaces for sport and leisure.

BMI UK & Ireland is also launching its new Blue Roof system. Blue Roof systems control water flow from rooftops and limit flooding during heavy rainfall. A water attenuation board, which stores water temporarily, is covered with a permeable top layer, which itself can be a Green Roof to further increase roof attenuation capabilities, while outlets work to restrict the flow rate of water from the roof to greenfield levels.

Blue Roofs can be deployed in inverted roof structures, podium decks, warm roofs and ballasted roofs. The build-up of an inverted Blue Roof, for instance, would comprise a waterproofing layer, insulation, water attenuation void former, filter layer and the top, permeable, layer.

Blue Roofs tend to require fewer outlets than a traditional design, which means that construction times can be shorter and there are fewer penetrations which reduce the risks of faults or leaks. The number of flow restrictor outlets, the openings within that outlet and their position must be carefully designed and installed accordingly. An important step in the installation process is a post-installation inspection to ensure that the roof has been built to the intended design.

BMI Blue Roofs comply fully with the National Federation of Roofing Contractors’ (NFRC) Blue Roof design guidelines. The NFRC guide says that the roof should hold water for no longer than 24 hours and the flow rate should be such that half of the roof’s capacity is discharged after 12 hours. Blue Roofs should be equipped with an emergency overflow outlet to allow excess water to be discharged should there be an unusually high rainfall, that is a 1:100 storm event. In BMI’s system, the overflow is set into the middle of the main outlet, with a vertical pipe cut at a height to match maximum water levels.

Blue Roofs are gaining popularity in the UK as an alternative form of Sustainable Urban Drainage Systems (SUDS). Other methods such as below-ground water attenuation tanks are almost always more expensive to construct and may simply not be possible in built-up areas.

Both the Green and Blue Active Roof Systems benefit from BMI’s complete six-step ‘cradle to grave’ design, advice and calculation service. This starts with consultation and site surveys, leading to specification, site support and project monitoring; and concludes with industry-leading roof systems guarantees for both roof types. On completion, the roof is covered – both literally and metaphorically.

BMI UK & Ireland also has a dedicated field service, with a network of technical advisers available to provide a bespoke Green or Blue Roof specification to meet any client’s needs and project requirements. This service is free of charge and its consultants are available at any time to answer queries on any aspect of Green or Blue Roofing design.

BMI UK & Ireland is the largest manufacturer of flat and pitched roofing and waterproofing solutions in the UK and Europe. Formed following the coming together of Icopal and Monier Redland, it has heritage in roofing reaching back over 180 years and is an industry leader offering the highest quality solutions for both pitched and flat roofing.

Featured News

Specification news
CCF appoints new Head of Customer Sustainability

Leading insulation, drywall, and ceiling product distributor CCF has appointed Phil...

Read More >>

Specification news
New dMEV-NICO fan from Domus Ventilation

UK ventilation manufacturer Domus Ventilation has launched a new Decentralised...

Read More >>

BUILDING PRODUCT LIBRARY - LATEST BROCHURES

REVO.Prime TSA 325 NT Brochure

REVO.Prime TSA 325 N...
By GEZE UK Ltd

Download Now >>

Natural ventilation strategy for Sunderland SEND school Brochure

Natural ventilation...
By Passivent

Download Now >>

Squash Court Flooring Brochure

Squash Court Floorin...
By Junckers Limited

Download Now >>

Junckers Acoustics Floor System Brochure

Junckers Acoustics F...
By Junckers Limited

Download Now >>

BUILDING PRODUCT DIRECTORY - LATEST PRODUCTS

Ei1025 Environmental Sensor
Ei1025 Environmental Sensor

Discreet and secure, the Ei1025 Environmental Sensor can be placed throughout a property to monitor...

Read More >>

Ei1000G SmartLINK Gateway
Ei1000G SmartLINK Gateway

The Gateway and Cloud portal use Aico’s SmartLINK technology to bring together data from all...

Read More >>

Ei3030 Multi-Sensor Fire and Carbon Monoxide Alarm
Ei3030 Multi-Sensor Fire and Carbon Monoxide Alarm

The Ei3030 is a multi-sensor Fire & Carbon Monoxide (CO) Alarm. Containing our proven and dependable...

Read More >>

CONSTRUCTION VIDEOS - LATEST VIDEOS

Forma aluminium column casings for Winchester College
Forma aluminium column casings for Winchester College

In progressive and dynamic business sectors, such as construction, it’s natural to be forward...

Watch Now >>

Decorative metal bulkheads & column casings for Tesco Extra, Birmingham
Decorative metal bulkheads & column casings for Tesco Extra, Birmingham

Decorative aluminium horizontal bulkheads more than 100 metres long have been supplied and installed...

Watch Now >>

Vecta building linings for the perfect finish
Vecta building linings for the perfect finish

More than 150 sq.m of Vecta aluminium wall lining and a feature bulkhead have been manufactured and...

Watch Now >>