Uponor, the heating and cooling specialist, has developed a new, easy-to-fit electric underfloor heating system for self build projects, called Comfort E.
The ultra-slim electric underfloor heating system has been designed to offer ease and speed of installation for any room, with a mat that is simply rolled out under the floor finish and connected to the electrical system.
Suitable for both new builds and renovation projects, the system is available in two variants; a 3mm thick fibreglass mesh mat with sewn-in cables to avoid cable uplift and reduce installation times for use under tile, Karndean or lino floor finishes, and a foil mat with optional 6mm insulation for use under laminate or tongue and groove wooden flooring.
Explains David Playfoot from Uponor: “Underfloor heating is a popular choice for selfbuilders because it offers controllable, zonable radiant heat to maximise comfort while avoiding the spatial and layout challenges of wall-mounted heating units.
“Our Comfort E electrical underfloor heating system offers the flexibility to add underfloor heating to specific areas within the home, such as the bathroom or bedroom, or a conservatory, the room to be heated on a standalone circuit to comply with building regulations. Installation is so easy that any DIYer could do it with the help of an electrician to complete the connection.
Available in sizes from 1m2 to 12m2, both the mat and foil systems are simply rolled out onto the floor. The mat system then needs to be sealed into place using tile adhesive or levelling compound before the floor finish is installed. For the foil system, Uponor recommends that its 6mm insulation is installed first to maximise energy efficiency and provide an acoustic barrier, then the foil is simply laid flat and the laminate or wood system is installed directly onto it. Both systems provide a low profile floor build up, helping to maximise floor to ceiling heights.
Comfort E then simply connects to the electricity supply to provide rapid, controllable and energy efficient heat-up and cool-down via a dial or digital thermostat, with heat dispersion provided by either the levelling compound/adhesive or foil to ensure even heating throughout the space.
David continues: “The Comfort E range has been developed specifically for the self build market as it provides all the flexibility and interior comfort of a conventional ‘wet’ underfloor heating system with much faster and easier installation.
“For selfbuilders planning to do some of the work on their new home themselves, this makes Comfort E the ideal solution while offering them the confidence of a BEAB approved, high quality product, designed and manufactured in Germany and backed by Uponor’s international expertise in heating and cooling.”