Maggie’s Oldham, the world’s first building made from hardwood crosslaminated timber (CLT), has opened in the UK.
Designed by dRMM Architects and supported by the American Hardwood Export Council, this is a pivotal moment for modern architecture and construction.
Maggie’s is a charity that provides practical and emotional support to people living with cancer. Built on the grounds of specialist NHS cancer hospitals, Maggie’s Centres are warm and welcoming places with qualified professionals on hand to offer a programme of support shown to improve physical and emotional wellbeing.
dRMM chose tulipwood for the design of Maggie’s Oldham for the positive influence wood has on people and for the beauty, strength and warmth inherent to American tulipwood.
Wood is known to significantly reduce blood pressure, heart rates and recovery times; it has more health and wellbeing benefits than any other building material, according to Wood Housing Humanity Report 2015.
This pioneering piece of permanent architecture is constructed from more than 20 panels of five layer cross-laminated American tulipwood, ranging in size from 0.5m – 12m long.
American tulipwood CLT was pioneered in 2013 by dRMM, AHEC and Arup for its unparalleled strength and lightness, speed of construction and sustainability. American tulipwood is approximately 70% stronger in bending than a typical CLT grade softwood. The structural CLT panels for Maggie’s Oldham were developed by CLT specialists, Züblin Timber.
The first public experiment with this building material was The Endless Stair, created during the London Design Festival 2013. Arup’s engineering calculations show the structure could have supported 100 people at any one time.
Tulipwood CLT is one of the most sustainable timber species because of how fast it replenishes, through natural growth alone.
Maggie’s Oldham contains 27.6m3 of American tulipwood and 1.1m3 of American ash, equivalent to around 55.22m3 and 2.1m3 respectively of sawn wood before processing, which in terms comes from around 115.7m3 of logs – and all these logs will be replaced in just 120 seconds (108 seconds for the tulipwood and 12 seconds for the ash).
dRMM co-founder Prof. Alex de Rijke’s experiments with engineered timber have progressed during 30 years in practice and academe. The studios building and furniture projects have pushed the structural, environmental, and aesthetic properties of engineered timber, from plywood to engineered softwood, and now to the collaborative invention of hardwood CLT.
“From the Oldham project inception we knew it was the right material for Maggie’s, not only structurally and visually, but conceptually. An elevated, open plan, all-timber and glass building - with trees growing through it, and every detail considered from the perspective of use, health, and delight - was always going to be special,” says Alex de Rijke.
“Maggie’s Oldham has a built-in, very visible holistic design message that supports the central aims of the design – to uplift and offer hope to people living with cancer. The applications for sustainably grown hardwood, particularly fast growing tulipwood CLT is endless. The environmental, structural and visual qualities are demonstrated explicitly at dRMM’s Maggie’s; a manifesto for wood as the natural choice for contemporary architecture of physical and psychological well-being’.”
The main kitchen table around which Centre visitors are encouraged to sit, is a design by Barnby Day that was commissioned by Alex de Rijke and AHEC for the Wish List project for London Design Festival 2014. It is built by Benchmark Furniture from recycled tulipwood CLT. The top was left over from the Wish List and the base is made from off-cuts of CLT that came from the windows and doors of Maggie’s Oldham.
For AHEC, Maggie’s Oldham is one of the most important developments in a decade of research and development into structural timber innovation and one that could broaden the use of CLT in the construction industry. The creation of this product and significant use of hardwood will transform the way architects and engineers approach timber construction.
“This structure proves that hardwoods have a role to play in the timber construction revolution,” says David Venables, European Director of AHEC. “All our previous projects – Timber Wave, Out of the Woods, Endless Stair and The Wish List – have been significant projects but this centre proves that a building made of Tulipwood CLT is possible, and it can be done on a strict budget and in record time. dRMM also believes in the potential of tulipwood CLT as bringing a revolutionary new element to wood construction.”